What You Need:
3+ Feet of Clear Rubber Tube (That will fit snug onto the funnel) 1 Good Size Funnel 1 Valve Knife that will cut tube
What To Do:
This one is pretty common sense. If you’re here, you probably have already seen what a beer bong looks like. So here’s the easiest way to explain this. Put all the parts together in the only way that they will fit. (if you can’t figure this out, find someone that’s sober.)
So the funnel is at the the top. Attach the long piece of tubing to the end of the funnel. You can use fasteners if you want, but home depot has perfect funnel/tube that doesn’t require it. Then, cut off about 4” off the end of the tube. Attach the valve in between the two pieces of tube and your done.
To Use:
Close the Valve Pour Beer in the funnel at the top Put End of tube in your mouth Open Valve
If you want to save yourself a trip to the store, just pick up an already built one on amazon for cheap, it’ll be to your house in 2-days with prime.